LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2005 (Climate Control) >> Removal And Installation >> Vacuum Control Motor >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the vacuum supply hose from the vacuum control motor.
  2. Remove the 2 vacuum control motor screws. Rotate the vacuum control motor until it clears the retaining arm and remove the vacuum control motor.
    3. Fig 1: Vacuum Control Motor
    GF0025769Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals