LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> ZX2 Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedure >> Camshaft Surface Inspection

Camshaft Surface Inspection

  1. Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.
    • If excessive pitting or damage is present, install new components as necessary. Refer to CAMSHAFT for the procedure.
    Fig 1: Inspecting Camshaft Lobes For Pitting Or Damage
    G01370840Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals