LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Windstar SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Piston - Pin Diameter

Piston - Pin Diameter

  1. Measure the piston pin diameter in two directions at the points shown. Verify the diameter is within specification.
    • Refer to SPECIFICATIONS .
    • If out of specification, install new components as necessary. Refer to ENGINE article for the procedure.
      Fig 1: Measuring Piston Pin Diameter In Two Directions At Points
      G03455485Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals