LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Windstar Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Push Rods - Inspection

Push Rods - Inspection

    CAUTION: Do not attempt to straighten push rods.
  1. Check the ends of the push rods for nicks, grooves, roughness or excessive wear. Install new push rods as necessary. Refer to PUSH ROD .
    • The push rods can be checked for straightness while they are installed in the engine by rotating them with the valve closed.
    • They also can be checked using a Dial Indicator with Bracketry.
      Fig 1: Identifying Dial Indicator With Bracketry
      G03455447Courtesy of FORD MOTOR CO.
  2. If the push rod is bent beyond specifications, install a new push rod. Refer to PUSH ROD for the procedure.
scientia non olet · About LEMON Manuals