LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Windstar LX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Removal & Installation >> Transaxle Range Sensor >> Removal

Transaxle Range Sensor: Removal

  1. Set the parking brake. Place the transaxle range selector lever in Neutral. Disconnect the battery ground cable. Remove the engine air cleaner assembly. Disconnect the connector.
  2. Disconnect the shift cable. Remove the manual control lever. See Fig 1.
  3. Remove the digital Transaxle Range (TR) sensor. See Fig 2.
Fig 1: Identifying Manual Control Lever Nut
G00127367Courtesy of FORD MOTOR CO.
Fig 2: Identifying Transaxle Range Sensor Bolts
G00127368Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals