Camshaft Runout: Procedure
WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Use a Dial Indicator Gauge with Holding Fixture to measure the camshaft runout.
- Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading.
- For additional information, refer to appropriate ENGINE article for the procedure.
- If out of specification, install new components as necessary. Refer to appropriate ENGINE article for the procedure.
NOTE:
Camshaft journals must be within specifications before checking runout.