LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Taurus SES, 3.0 2, AX4S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Ax4S >> Disassembly And Assembly Of Subassemblies >> Pump Shaft

Pump Shaft

    NOTE: Inspect the pump drive shaft in the area that the bearings ride. If worn, install a new shaft and main control.
    Fig 1: Identifying Teflon® Seals And Inspect Shaft
    G01575192Courtesy of FORD MOTOR CO.
  1. Remove the Teflon® seals and inspect the shaft.
    2. NOTE: Make sure that the seals are installed correctly.
    Fig 2: Identifying Pump Shaft Seals
    G01575193Courtesy of FORD MOTOR CO.
  2. Install 4 new seals on the pump shaft.
scientia non olet · About LEMON Manuals