LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Taurus LX, 3.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Engine System-General Information) >> General Procedures >> Bearing - Inspection

Bearing - Inspection

WARNING: This page is about a different car, the 2003 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect bearings for the following defects. Possible causes are shown:
    1. Cratering - fatigue failure.
    2. Spot polishing - incorrect seating.
    3. Imbedded dirt engine oil.
    4. Scratching - dirty engine oil.
    5. Base exposed - poor lubrication.
    6. Both edges worn - journal damaged.
    7. One edge worn - journal tapered or bearing not seated.
    Fig 1: Inspecting Bearing
    G01623480Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals