Disc Brake Specifications
WARNING: This page is about a different car, the 2004 Ford Mustang, 2003 Ford Mustang, and 2002 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE SPECIFICATIONS
| Application |
In. (mm) |
| Front Brake Pads |
| Minimum Thickness |
| 3.8L |
0.08 (2.0) |
| 4.6L |
0.039 (1.0) |
| Maximum Thickness Variation (Pad-To-Pad) |
0.08 (2.0) |
| Maximum Taper Wear (In Any Direction) |
0.118 (3.0) |
| Front Disc |
| Diameter |
| 3.8L |
10.8 (274) |
| 4.6L |
13.0 (330) |
| Lateral Runout |
.002 (.05) |
| Disc Original Thickness |
| 3.8L |
1.01 (25.7) |
| 4.6L |
1.10 (28) |
| Minimum Thickness |
| 3.8L |
0.97 (25) |
| 4.6L |
1.04 (26) |
| Original Thickness |
1.10 (28) |
| Parallelism (Maximum Thickness Variation) |
.00035 (.009) |
| Hub Runout |
.001 (.025) |
| Rear Brake Pads |
| Minimum Thickness |
0.039 (1.0) |
| Maximum Thickness Variation (Pad-To-Pad) |
0.079 (2.0) |
| Maximum Taper Wear (In Any Direction) |
0.118 (3.0) |
| Rear Disc |
| Diameter |
| 3.8L |
10.5 (267) |
| 4.6L |
11.65 (296) |
| Lateral Runout |
.004 (.10) |
| Minimum Refinish Thickness |
0.53 (13.35) |
| Minimum Thickness (Discard) |
0.502 (12.75) |
| Original Thickness |
0.55 (14.0) |
| Parallelism (Maximum Thickness Variation) |
.0004 (.010) |
| Rear Axle Flange Maximum Runout |
0.005 (0.127) |