LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Ranger 2D Pickup, 2.3 D, Standard >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> General Procedures >> Exhaust System Alignment

Exhaust System Alignment

  1. Raise the vehicle on a hoist.
  2. Loosen all exhaust component fasteners from the exhaust manifold(s) to the muffler inlet pipe.
    3. NOTE: Make sure the exhaust insulators are hanging straight up and down.
  3. Beginning at the front of the vehicle, align the exhaust system to establish maximum clearance.
  4. Beginning at the front of the vehicle, tighten all fasteners to specification. Refer to SPECIFICATIONS .
  5. Start the engine and check the exhaust system for leaks.
scientia non olet · About LEMON Manuals