LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Mustang Mach 1, Automatic >> Repair and Diagnosis >> Suspension >> Front Suspension >> Removal & Installation >> Spindle Assembly >> Installation

Spindle Assembly: Installation

  1. To install, reverse removal procedures. Tighten ball joint stud nut, and install NEW cotter pin. DO NOT back off nut to install cotter pin. Tighten nut to align cotter pin holes. Tighten shock-to-spindle attaching nuts to specification. See TORQUE SPECIFICATIONS .
  2. Lower and remove jack. Install remaining components in reverse order of removal. Check wheel alignment. See SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.
scientia non olet · About LEMON Manuals