LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Mustang GT, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine-4.6L 2V >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Disassembly

Cylinder Head: Disassembly

  1. Install the special tool.
    Fig 1: Installing Special Tool
    G01624399Courtesy of FORD MOTOR CO.
  2. Using the special tool, remove the roller followers.
    Fig 2: Removing Roller Followers
    G01624400Courtesy of FORD MOTOR CO.
  3. Using the special tool, compress the valve spring.
    Fig 3: Compressing Valve Spring
    G01624401Courtesy of FORD MOTOR CO.
  4. Remove the valves.
    1. Remove the valve spring retainer keys.
    2. Remove the valve spring retainers.
    3. Remove the valve spring.
    4. Remove the valves.
      Fig 4: Removing Valves
      G01624402Courtesy of FORD MOTOR CO.
  5. Remove the hydraulic lash adjusters.
    Fig 5: Removing Hydraulic Lash Adjusters
    G01624403Courtesy of FORD MOTOR CO.
  6. Remove the bolts and the camshaft bearing caps.
    Fig 6: Removing Bolts And Camshaft Bearing Caps
    G01624404Courtesy of FORD MOTOR CO.
  7. Remove the camshaft (6250).
    Fig 7: Removing Camshaft
    G01624405Courtesy of FORD MOTOR CO.
  8. Remove the valve stem seals.
    Fig 8: Removing Valve Stem Seals
    G01624406Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals