Removal And Installation
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LH front window control switch shown, all others similar.
NOTE:
The removal and installation procedures for all window control switches are similar.
- Remove the front door trim panel or the rear door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
- Release the window control switch bezel from the door trim panel.
- Release the locking tabs and remove the window control switch from the bezel.
- To install, reverse the removal procedure.