Incomplete I/M Readiness Status (06-7-5)
WARNING: This page is about the Focus SE, 4D Sedan, 2.0 3, Automatic, which is a different variant/trim than selected.
Publication date: 2006-04-17Reference number: 06-7-5
INCOMPLETE I/M READINESS STATUS
TECHNICAL SERVICE BULLETIN
Reference Number(s): 06-7-5, Date of Issue:
April 17, 2006
| FORD: | 2003 Focus |
ISSUE
Some 2003 Focus vehicles may exhibit incomplete inspection/maintenance (I/M) readiness status during state inspection.
ACTION
If the vehicle exhibits this concern reprogram the powertrain control module (PCM) to the latest calibration using WDS release B42.2 and higher. Calibration files may also be obtained at www.motorcraft.com.
WARRANTY INFORMATION
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage.
WARRANTY INFORMATION
| Operation | Description | Time |
|---|---|---|
| 060705A | 2003 Focus: Check Diagnostic Trouble Codes And Reprogram The Powertrain Control Module (Do Not Use With 12650D, 12650D84) | 0.4 Hr. |
DEALER CODING
| Basic Part No. | Condition Code |
|---|---|
| recalem | 04 |