LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Focus SVT, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine-2.0L SPI) >> In-Vehicle Repair >> Oil Pump >> Removal

Oil Pump: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the timing belt. For additional information, refer to TIMING BELT .
  2. Using the special tools, support the engine.
    Fig 1: Supporting Engine
    G01615183Courtesy of FORD MOTOR CO.
  3. Remove the jack.
  4. Remove the crankshaft timing belt pulley.
    Fig 2: Removing Crankshaft Timing Belt Pulley
    G01615184Courtesy of FORD MOTOR CO.
  5. Remove the oil pan. For additional information, refer to OIL PAN .
  6. Remove the crankshaft position (CKP) sensor.
    Fig 3: Removing Crankshaft Position Sensor
    G01615185Courtesy of FORD MOTOR CO.
  7. Remove the two bolts and the oil pump screen cover and tube.
    • Discard the gasket.
      Fig 4: Removing Oil Pump Screen Cover And Tube
      G01615186Courtesy of FORD MOTOR CO.
  8. Remove the oil pump.
    • Discard the gasket.
      Fig 5: Removing Oil Pump
      G01615187Courtesy of FORD MOTOR CO.
  9. Remove the oil pump seal.
    Fig 6: Removing Oil Pump Seal
    G01615188Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals