Torque Converter Flushing
- Following the instructions included with any suitable torque converter fluid cooler cleaner, flush the torque converter.
- After flushing, drain the remainder of the solvent.
- Add 1.9 liter (2 qt.) of clean MERCON®(r) V Automatic Transmission Fluid XT-5-QM or equivalent meeting MERCON®(r) V specification into the converter fluid filler tube and agitate by hand.
- Thoroughly drain the solution.
CAUTION:
Mineral spirits used to clean the torque converter must be fresh, non-chlorinated and non-halogenated.