Output State Control (OSC) Procedures:: Notes

• Carry out visual inspection and vehicle preparation as required.
• Select "Vehicle and Engine Selection" menu.
• Select appropriate vehicle and engine.
• Select "Diagnostic Data Link."
• Select "Powertrain Control Module."
• Select "Diagnostic Test Mode."
• Select "KOEO On-Demand Self Test and KOER On-Demand Self Tests."
• Carry out test and record DTCs.
• Repair all NON-Transmission DTCs.
• Repair all VSS and digital TR sensor DTCs.
• Make sure that VSS/digital TR sensors are functional.
• Select "Active Command Modes."
• Select "Trans - Bench Mode or Trans - Drive Mode."