LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Explorer Sport 4.0 E, RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transaxle/Transmission) >> In-Vehicle Repair >> Intermediate Shaft Speed Sensor >> Removal

Intermediate Shaft Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle.
  2. Disconnect intermediate shaft speed (ISS) sensor electrical connector.
    Fig 1: Disconnecting Intermediate Shaft Speed (ISS) Sensor Electrical Connector
    G01298916Courtesy of FORD MOTOR CO.
  3. Remove ISS sensor.
    1. Remove the ISS sensor screw.
    2. Remove the ISS sensor from the transmission.
    • Inspect the ISS sensor O-ring for damage. If damaged, install a new O-ring.
    Fig 2: Removing ISS Sensor Screw
    G01298917Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals