LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Explorer Sport 4.0 E, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (Acceleration Control System) >> Diagnosis And Testing >> Acceleration Control >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2004 Ford Explorer Sport Trac. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Care should be exercised when carrying out repair on or around the accelerator pedal linkage and controls.
  1. Inspect the accelerator pedal and shaft and attaching linkage for damage or distortion which would bind or limit accelerator travel.
  2. Inspect the accelerator cable for kinks or fraying which may cause binding.
  3. Inspect the engine idle speed adjustment to make sure of the correct idle speed specification after any accelerator linkage adjustment or repair.
  4. Inspect throttle body for excessive wear or damage.