Digital Transmission Range (Tr) Sensor: Installation

WARNING: This page is about a different car, the 2003 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Install the digital transmission range (TR) sensor.
1. Install digital transmission range (TR) sensor.
2. Loosely install the bolts.
  
  Fig 1: Installing Digital Transmission Range Sensor
  Courtesy of FORD MOTOR CO.

NOTE: Make sure that the manual control lever is in the NEUTRAL position.

Fig 2: Aligning digital transmission range sensor

Courtesy of FORD MOTOR CO.

Using the special tool, align the digital TR sensor.
Tighten the bolts.

Fig 3: Tightening Digital Transmission Range Sensor Bolts
Courtesy of FORD MOTOR CO.
Reconnect the shift cable at the manual control lever.

Fig 4: Connecting Shift Cable At Manual Control Lever
Courtesy of FORD MOTOR CO.
Reconnect the connector.

Fig 5: Connecting Connector
Courtesy of FORD MOTOR CO.
Lower the vehicle.
Reconnect the battery ground cable.