LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Excursion 7.3 F, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 573 (Module Configuration System -- Excursion & F250-F550 Super Duty) >> General Procedures >> Programmable Module Installation >> Using The Worldwide Diagnostic System (WDS) When The Original Body Chassis Electrical Module Is Available

Using The Worldwide Diagnostic System (WDS) When The Original Body Chassis Electrical Module Is Available

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the WDS and ID the vehicle as normal.
  2. From the Toolbox icon, select and highlight: Module Programming and press the check mark.
  3. Select and highlight: Programmable Module Installation.
  4. Follow the on-screen instructions.
  5. Install the new module.
  6. Follow the on-screen instructions.
  7. Module configuration is complete.