Body Support-Front Upper: Removal
-
NOTE: When removing upper body insulators, all other body mount support bolts must be loose before raising the vehicle cab to prevent permanent structural damage from occurring to the vehicle cab.
Remove the lower body insulator; for additional information, refer to BODY SUPPORT-FRONT LOWER in this section.
- Remove the opposite side front body insulator bolt; for additional information, refer to BODY SUPPORT-FRONT LOWER in this section.
-
NOTE: Step 3 is for Crew Cab vehicles only.
Remove and discard the left and right middle insulator bolts; for additional information, refer to BODY SUPPORT-MIDDLE, CREW CAB, LOWER in this section.
-
NOTE: Choose the proper procedure to match the vehicle that is being serviced.
Remove and discard the left and right rear body insulator bolts; refer to BODY SUPPORT-REAR, REGULAR CAB, LOWER ; BODY SUPPORT-REAR, SUPERCAB, LOWER ; or BODY SUPPORT-REAR, CREW CAB, LOWER .
- Raise the vehicle body enough to allow removal of the insulator.
- Remove the insulator.