LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Escape 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine - 4.2L) >> In-Vehicle Repair >> Engine Dynamic Balance Shaft >> Removal

Engine Dynamic Balance Shaft: Removal

WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine front cover (6019). For additional information, refer to ENGINE FRONT COVER .
  2. Remove the synchronizer drive gear.
    Fig 1: Removing Synchronizer Drive Gear
    G01535899Courtesy of FORD MOTOR CO.
  3. Remove the crankshaft sprocket (6306), camshaft sprocket (6256) and timing chain as an assembly.
    Fig 2: Removing Crankshaft Sprocket
    G01535900Courtesy of FORD MOTOR CO.
  4. Remove the engine balance shaft drive gear (6A303).
    Fig 3: Removing Engine Balance Shaft Drive Gear
    G01535901Courtesy of FORD MOTOR CO.
  5. Remove the timing chain vibration damper (6284).
    Fig 4: Removing Timing Chain Vibration Damper
    G01535902Courtesy of FORD MOTOR CO.
  6. Remove the screws and the engine dynamic balance shaft (6A311).
    Fig 5: Removing Screws And Engine Dynamic Balance Shaft
    G01535903Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals