LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Escape 2.0 B >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Connecting Rod Large End Bore

Connecting Rod Large End Bore

  1. Tighten the bolts to specification, then measure the bore in two directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.
    • Refer to the appropriate ENGINE article for the procedure.
    • If out of specification, install new components as necessary.
      Fig 1: Measuring Connecting Rod Large End Bore
      G01389016Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals