Quick Test: Introduction: Description
QUICK TEST checks integrity and function of EEC-V powertrain control system and outputs test results upon demand. QUICK TEST also provides a quick end-check of powertrain control system and is usually performed at start of each diagnostic procedure. It is also performed at end of most diagnostic tests for verification of repair and to make sure no other faults were incurred while servicing a previous fault. All self-tests are completely menu driven in NGS tester. QUICK TEST is made up of 8 functional tests of EEC-V system. To avoid misdiagnosis, always perform VISUAL CHECK and VEHICLE PREPARATION & EQUIPMENT HOOKUP before performing the following procedures in sequence: