LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 6.8 S >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 6.8L >> In-Vehicle Repair >> Powertrain Control Module (PCM) >> Removal & Installation

Removal & Installation

  1. Disconnect the battery ground cable. For additional information, refer to Battery, Mounting & Cables  .
  2. Remove the air cleaner assembly. For additional information, refer to Intake Air Distribution & Filtering  .
  3. Disconnect the Powertrain Control Module (PCM) Electrical Connector.
    Fig 1: Disconnecting Powertrain Control Module (PCM) Electrical Connector
    G02761793Courtesy of FORD MOTOR CO.
  4. Remove the PCM.
    1. Remove the nuts.
    2. Remove the cover.
    3. Remove the PCM.
    Fig 2: Removing PCM
    G02761794Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals