Cylinder Block: Inspection
WARNING: This page is about a different variant/trim than selected.
- Inspect the cylinder block for cracks not visible to the eye.
- Coat the suspected area with a mixture of 25 percent kerosene and 75 percent light engine oil.
- Wipe the area dry, and immediately apply a coating of zinc oxide dissolved in wood alcohol. If cracks are present, the coating will become discolored at the damaged area.
CAUTION:
There is no authorized repair for internal cracks in the cylinder block. If cracks are present, install a new cylinder block.
NOTE:
Do not substitute rubbing alcohol for wood alcohol.