Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
Disconnect the plenum chamber vacuum harness connector.
Disconnect the vacuum hose.

Fig 1: Vacuum Connector

Courtesy of FORD MOTOR CO.

Remove the 2 plenum chamber screws.
Remove the plenum chamber.
To install, reverse the removal procedure.