LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 272 (Steering Column Switches) >> Removal And Installation >> Ignition Switch >> Installation

Ignition Switch: Installation

WARNING: This page is about a different car, the 2003 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
    Fig 1: Tightening Ignition Switch Screws
    G01306627Courtesy of FORD MOTOR CO.
    Fig 2: Connecting Ignition Switch Electrical Connector
    G01306628Courtesy of FORD MOTOR CO.
    Fig 3: Tightening Screws
    G01306629Courtesy of FORD MOTOR CO.
    Fig 4: Installing Instrument Panel Lower Steering Column Opening Cover
    G01306630Courtesy of FORD MOTOR CO.
  1. To install, reverse the removal procedure.