LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> ZX2 Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Cylinder Bore - Taper

Cylinder Bore - Taper

  1. Measure the cylinder bore at the top and bottom. Verify the cylinder bore is within the wear limit. The difference indicates the cylinder bore taper. Bore the cylinder to the next oversize.
    • For additional information, refer to Specifications in the appropriate ENGINE article .
    Fig 1: Measuring Cylinder Bore (Taper)
    G02207429Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals