LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Windstar SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Piston - Diameter

Piston - Diameter

  1. Measure the piston diameter 90 degrees from the piston pin and 42 mm down from the top of the piston at the point indicated.
    • If out of specification, install new components as necessary. Refer to ENGINE for the procedure .
      Fig 1: Measuring Piston Diameter
      G03424771Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals