LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Windstar SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Connecting Rod - Twist

Connecting Rod - Twist

  1. Measure the connecting rod twist on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the measurement is within specification.
    • If out of specification, install new components as necessary. Refer to ENGINE for the procedure .
      Fig 1: Measuring Connecting Rod Twist On A Suitable Alignment Fixture
      G03424783Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals