LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Windstar Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> General Procedures >> Engine and Radiator Flushing >> Material

Engine and Radiator Flushing: Material

MATERIAL

Item Specification
Motorcraft Premium Cooling System Flush VC-1 ESR-M14P7-A
Motorcraft Premium Engine Coolant VC-4-A (in Oregon, VC-5, in Canada, CXC-10) ESE-M97B44-A
Motorcraft Premium Gold Engine Coolant VC-7-A WSS-M97B51-A1
  1. Drain the cooling system. Refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING  .
  2. Remove the water thermostat (8575). Refer to THERMOSTAT  .
  3. Install the water hose connection (8592) without the water thermostat.
    4. NOTE: Refer to the manufacturer's operating instructions for specific vehicle hook-up.
  4. Using an appropriate cooling system flusher, flush the engine and radiator.

    Use cooling system flush for vehicles filled with premium engine coolant (green color) or premium gold engine coolant (yellow color).

  5. Install the water thermostat. Refer to THERMOSTAT  .
  6. Backflush the heater core (18476) if necessary. Refer to HEATER CORE BACKFLUSHING  .
  7. Fill the cooling system. Refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING  .
scientia non olet · About LEMON Manuals