LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine - 3.0L 2V) >> In-Vehicle Repair >> Timing Chain >> Installation

Timing Chain: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Align the timing marks.
    Fig 1: Aligning Timing Marks
    G02155164Courtesy of FORD MOTOR CO.
  2. Install the timing chain, the camshaft sprocket and the crankshaft sprocket as an assembly.
    Fig 2: Installing Timing Chain, Camshaft Sprocket & Crankshaft Sprocket As An Assembly
    G02155165Courtesy of FORD MOTOR CO.
  3. Install the camshaft sprocket bolt.
    Fig 3: Installing Camshaft Sprocket Bolt
    G02155166Courtesy of FORD MOTOR CO.
  4. Install the engine front cover. Refer to ENGINE FRONT COVER - WITH CIII POWER STEERING SYSTEM  OR ENGINE FRONT COVER - WITH CII POWER STEERING SYSTEM .
  5. Connect the battery ground cable.
scientia non olet · About LEMON Manuals