Ignition Switch
WARNING: This page is about a different car, the 2002 Mercury Sable, 2002 Ford Taurus, 2001 Mercury Sable, and 2001 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition switch to LOCK position. Disconnect ignition switch connector. Check for continuity between appropriate terminals with switch in specified position. See IGNITION SWITCH CONTINUITY table. See Figure. If continuity does not exist with switch in specified position, replace ignition switch. See IGNITION SWITCH under REMOVAL & INSTALLATION.
IGNITION SWITCH CONTINUITY
| Switch Position | Continuity Between Terminal No. |
|---|---|
| ACC | A1 & B1 |
| RUN | A1 & B1; A3 & B3; A4 & B4; B5 & I1 |
| START | B5 & I1; P1 & GND; B4 & STA |