LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Focus S2 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Diagnosis And Testing >> Transaxle Drive Cycle Test >> Before Pinpoint Tests

Before Pinpoint Tests

NOTE: Before entering pinpoint tests, check the powertrain control module wiring harness for correct connections, bent or broken pins, corrosion, loose wires, correct routing, correct seals and their condition. Check the PCM, sensors and actuators for damage. Refer to the SELF-DIAGNOSTICS - EEC-V - GASOLINE & NGV article .
NOTE: If a concern still exists after electrical diagnosis. REFER to DIAGNOSIS BY SYMPTOM .

If DTCs appear while carrying out the on-board diagnostics, refer to the DIAGNOSTIC TROUBLE CODE CHART for the appropriate repair procedure. Prior to entering pinpoint tests, refer to any TSBs for transaxle concerns

scientia non olet · About LEMON Manuals