LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Focus LX, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission - IB5 >> Disassembly And Assembly Of Subassemblies >> Input Shaft >> Assembly

Input Shaft: Assembly

  1. Carefully clean and check all parts and coat with Manual transmission fluid before reassembly.
  2. Using a press and a suitable tube, install the bearing (clutch end).
    Fig 1: Installing Bearing (Clutch End)
    G03854595Courtesy of FORD MOTOR CO.
    3. NOTE: The annular groove in the bearing must face outwards.
    Fig 2: Installing Bearing (Transaxle End)
    G03854596Courtesy of FORD MOTOR CO.
  3. Using a press and a suitable tube, install the bearing (transaxle end).
scientia non olet · About LEMON Manuals