LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Explorer 4.0 E, RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Servicing - Automatic Transmission) >> Adjustments >> Transmission Range Sensor

Transmission Range Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Remove the shift cable from the manual control lever. Remove the outer manual control lever. Using the Transmission Range Sensor Alignment Gauge (307-351), align the digital Transmission Range (TR) sensor. See Fig 1 .
  2. Tighten the TR sensor bolts in an alternating sequence to specification. See TORQUE SPECIFICATIONS  . Install the outer manual lever. Tighten manual control lever nut to specification. See TORQUE SPECIFICATIONS  . Ensure manual control lever is in the Neutral position.
  3. Install the shift cable to the manual control lever. Verify that the shift cable is adjusted correctly. See SHIFT CABLE  . Lower the vehicle.
Fig 1: Adjusting Transmission Range Sensor
G00031940Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals