LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Explorer 4.0 E, RWD, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System-General Information >> General Procedures >> Wheel Bearing Inspection

Wheel Bearing Inspection

  1. Raise the vehicle until the tire is off the floor.
    2. NOTE: Make sure the wheel rotates freely and the brake pads are retracted sufficiently to allow movement of the tire and wheel assembly.
  2. Grasp each front tire at the top and bottom and move the wheel inward and outward while lifting the weight of the tire off the front wheel bearing.
  3. If the wheel (hub) is loose or does not rotate freely, install a new wheel hub. For additional information, refer to FRONT - 2WD COIL SPRING (4x2) or FRONT - 4WD COIL SPRING (4x4).
scientia non olet · About LEMON Manuals