LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Explorer 4.0 E, 4WD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Reverse Servo Assembly >> Disassembly

Reverse Servo Assembly: Disassembly

  1. Remove the control valve spring retainer.
    2. Fig 1: Removing Control Valve Spring Retainer
    G01672354Courtesy of FORD MOTOR CO.
  2. Remove the reverse servo spring and check valve.
    3. Fig 2: Removing Reverse Servo Spring & Check Valve
    G01672355Courtesy of FORD MOTOR CO.
    NOTE: Tabs on servo plate mate with slots on cover every 120 degrees.
  3. Remove the reverse servo plate by turning in either direction to release.
    • Align arrow on servo plate with any slot on cover.
    4. Fig 3: Removing Reverse Servo Plate
    G01672356Courtesy of FORD MOTOR CO.
  4. Remove the reverse servo spring.
    5. Fig 4: Removing Reverse Servo Spring
    G01672357Courtesy of FORD MOTOR CO.
  5. Remove the reverse servo piston and seal assembly.
    • Inspect the seal for damage, install new reverse servo piston if necessary.
    6. Fig 5: Removing Reverse Servo Piston & Seal Assembly
    G01672358Courtesy of FORD MOTOR CO.
  6. Inspect and install a new reverse servo piston seal if damaged.
Fig 6: Inspecting Reverse Servo Piston Seal
G01672359Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals