LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Expedition 4.6 W, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Reverse Planet Assembly >> Disassembly

Reverse Planet Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.
NOTE: Individual parts of the planet assemblies are not repairable.
  1. Remove the No. 11 rear reverse planet thrust washer.
    Fig 1: Removing No. 11 Rear Reverse Planet Thrust Washer
    G03443920Courtesy of FORD MOTOR CO.
  2. Remove the No. 10B front reverse planet thrust washer.
    • The pins and shafts in the planet assemblies should be checked for loose fit/damage. Use a new planet assembly if either condition exists.
    • Inspect the pinion gears for damaged or excessively worn teeth.
    • Check for free rotation of the pinion gears.
    • Check for damage in the overdrive planet assembly.
    Fig 2: Removing No. 10B Front Reverse Planet Thrust Washer
    G03443921Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals