Temperature Cable: Installation
WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Position the cable housing to the temperature door shaft and press to engage. Install the temperature cable screw to the HVAC module. Tighten to specifications. See TORQUE SPECIFICATIONS .
- Center the HVAC module temperature door by aligning the cable lug of the temperature control cable with the center point of the detent spring.
- Detent spring force should hold the temperature door in the desired position.
- Install the center trim bezel.
- Center the temperature cable knob by inserting the assembly alignment tab into the centering slot of the temperature knob shaft. Install the temperature cable to the HVAC control by aligning the retention tabs and the temperature knob shaft and snapping into place.