LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Excursion 7.3 F, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1944 (HVAC Control System) >> Removal And Installation >> Blower Motor Speed Control >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the glove compartment.
  2. Disconnect the blower motor speed control electrical connector.
  3. Remove the 2 blower motor speed control screws.
    • To install, tighten to 3 Nm (27 lb-in).
  4. Remove the blower motor speed control.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals