LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis >> General Information >> Engine >> Engine System - General Information >> General Procedures >> Valve Stem Diameter

Valve Stem Diameter

  1. Measure the diameter of each intake and exhaust valve stem at the points shown. Verify the diameter is within specification.
    • Refer to SPECIFICATIONS .
    • If out of specification, install new components as necessary.
    Fig 1: Identifying Valve Stem
    G01941820Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals