Push Rods - Inspection

NOTE: This article contains information, steps and procedures that may not be specific to your engine.

CAUTION: Do not attempt to straighten push rods.

Fig 1: Checking Push Rod For Straitness Using Dial Indicator With Bracketry

Courtesy of FORD MOTOR CO.

Check the ends of the push rods for nicks, grooves, roughness or excessive wear. Install new push rods as necessary.
- The push rods can be checked for straightness while they are installed in the engine by rotating them with the valve closed.
- They also can be checked using a Dial Indicator with Bracketry.
If the push rod is bent beyond specifications, install a new push rod.