LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> General Information >> Engine >> Engine System - General Information >> General Procedures >> Piston - Pin-To-Bore Diameter

Piston - Pin-To-Bore Diameter

    WARNING: Cover the end of the pin bore with a hand or shop rag when removing the retainer ring, since it has a tendency to spring out. Wear eye protection.
    NOTE: Piston and piston pins are a matched set and should not be interchanged.
    Fig 1: Identifying Piston Pin Bore
    G01941797Courtesy of FORD MOTOR CO.
    Fig 2: Measuring Piston Pin Bore
    G01941798Courtesy of FORD MOTOR CO.
  1. Measure the piston pin bore diameter in two directions on each side. Verify the diameter is within specification. See SPECIFICATIONS .
scientia non olet · About LEMON Manuals