Pinpoint Test E: The Speed Control Does Not Deactivate When The Clutch Is Pressed

WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

E1 CHECK CLUTCH PEDAL POSITION (CPP) SWITCH

Disconnect: CPP Switch C257.
Measure the resistance between the CPP switch C257 pin 1 and pin 3, component side, with the switch plunger pressed and also with the plunger released.

Fig 1: Checking Clutch Pedal Position (CPP) Switch
Courtesy of FORD MOTOR CO.
Are the resistances greater than 10,000 ohms with the plunger pressed in and less than 5 ohms with the plunger released?

Yes

ADJUST the CPP switch.

INSTALL a new CPP switch.