LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine - 2.0L Inline) >> Overhaul >> Cylinder Block Assembly >> Cylinder Block

Cylinder Block

WARNING: This page is about a different car, the 2001 Ford Focus, 2001 Ford Escort, 2000 Ford Focus, and 2000 Ford Escort. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a feeler gauge and straightedge, inspect cylinder block deck surface for warpage. If not within specification, resurface or replace cylinder block. See CYLINDER BLOCK  table under ENGINE SPECIFICATIONS. DO NOT remove more than .010" (.25 mm) material from block deck.
  2. Measure cylinder bore out-of-round and taper. If out-of-round or taper exceeds specification, rebore cylinder for oversize piston. See CYLINDER BLOCK  table under ENGINE SPECIFICATIONS. If cylinder bore is okay, lightly hone cylinder to a cross-hatch pattern.
scientia non olet · About LEMON Manuals