Occupant Classification Sensor (OCS): Notes
CAUTION:
Damage to OCS is possible. When positioning OCS and seat cushion frame, ensure OCS is not damaged during procedure. Damage to OCS may result in component failure.
NOTE:
OCS is found only on right front seat. In addition, OCS is not installed on all models. A white tag having the letters "OCS" will appear under the front of right front seat, identifying seat equipped with OCS.
OCS components (seat cushion foam pad, bladder with pressure sensor and electronic control unit) are calibrated to each other. OCS components are not to be installed separately. If new component requires being replaced, all components must replaced as an assembly.
If replacing front passenger seat trim cushion trim cover only, OCS must be zeroed.
OCS components (seat cushion foam pad, bladder with pressure sensor and electronic control unit) are calibrated to each other. OCS components are not to be installed separately. If new component requires being replaced, all components must replaced as an assembly.
If replacing front passenger seat trim cushion trim cover only, OCS must be zeroed.
An original equipment OCS will have electrical connectors that can be disconnected at OCS pressure sensor and OCS electronic control module. Also, OCS will have seat cushion foam pad that is not attached to bladder and pressure sensor assembly. A service part OCS will have electrical disconnect deterrents at OCS pressure sensor and OCS electronic control module.