Gasoline Engines: Villager
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2002 Mercury Villager, 2002 Mercury Mountaineer, 2002 Lincoln Navigator, 2002 Lincoln Blackwood, and 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
Connect scan tool to DLC. Turn ignition on. Using scan tool, enter correct year, make, and model. Using DVOM, measure TP sensor voltage with throttle valve completely closed. Loosen TP sensor screws. Adjust TP sensor so voltage is 0.3-0.7 volt. Tighten TP sensor screws. Using scan tool, ensure IDLE SW PID reads ON. Start engine and warm to normal operating temperature. Turn ignition off. Turn ignition on for 5 seconds and then off for 5 seconds. Repeat 20 times.